Detecting

FBS1100-0900
SENSOR WITH BINARY INPUT SINGLE

For connecting sensors like light barriers, twilight switches on TCS front-door stations. For transmitting additional switching functions, e.g. garage doors and shutter controls in conjunction with BRE-xx. The sensor is not compatible with systems for assisted living or with special call function.

• Input differentiates between opening and closing as well as the duration of the keystroke
• Input requires connection of a potential-free switch
• 2- or 3-wire technique possible
• Maximum 10 devices usable with 2-wire technique
• Input current (binary input): 0.4mA (use appropriate contacts)
• Input current (2-wire): I(a) = 1.3mA (input not activated)
• Input current (3-wire): I(a) = 0.4mA, I(P) = 1.0mA without load
• Max. input current (2-wire): I(a) = 1.7mA (input activated)
• Max. input current (3-wire): I(a) = 2.3mA (input activated)
• Maximum length of input connecting line: 2m
• Integrated connecting line with 8 cm, length, 0.8mm diameter
• Acceptable ambient temperature: -20°C to 50°C
• Degree of protection: IP20 (installation in one gang box, protection against moisture)

BMN2-EB
SENSOR WITH BINARY INPUT DOUBLE (FM)

Input for triggering control functions, double

• Input differentiates between opening and closing
• Input requires connection of a potential-free switch
• 2- or 3-wire technique possible
• For use in systems for assisted living | with special call function
• Maximum 10 devices usable with 2-wire technique
• Input current (binary input): 0.4mA (use suitable contacts)
• Input current (2-wire): I(a) = 1.1mA without load
• Max. input current (2-wire):I(a) = 2.5mA (both inputs activated)
• Maximum length of input connecting line: 2m
• Max. line diameter: 0.8mm
• Acceptable ambient temperature: -20°C to 50°C
• Degree of protection: IP20 (installation in one gang box, protection against moisture)

FBS1105-0900
BUILT-IN DOOR RELEASE TRANSMITTER

Configurable sensor for triggering a function on TCS:BUS

• Input for triggering door release, floor call, light and control functions
• Input differentiates between opening and closing
• Input requires connection of a potential-free switch
• 2- or 3-wire technique possible
• Configuration with configuration software configo (starting with version 1.6)
• Not for use in systems with special call functions
• Maximum 10 devices usable with 2-wire technique
• Input current (binary input): (0.4mA) use appropriate contacts
• Input current (2-wire): I(a) = 1.3mA (input not activated)
• Input current (3-wire): I(a) = 0.4mA, I(P) = 1.0mA without load
• Max. input current (2-wire): I(a) = 1.7mA without load
• Max. input current (3-wire): I(a) = 1.5mA (input activated)
• Maximum length of input connecting line: 2m
• Integrated connecting lines with 8cm length, 0.8mm diameter
• Acceptable ambient temperature: -20°C to 50°C
• Degree of protection: IP64 (for installation in one gang box)

FIS1100-0600
FLOOR CALL GENERATOR

For up to 4 floor calls

• 1 TCS:BUS protocol programmable per channel
• Supply of the module via TCS:BUS in 3-wire technique (loop through possible)
• Can be used multiple times on one floor
• Programming mode can be switched on directly on the device
• Indication of the operation mode by yellow LED
• Call distinction
• Supply voltage: 26V DC ± 8 %
• Supply output: (2mA)
• Acceptable ambient temperature: -20°C to 50°C