Video 2-wire system components

NVV1000-0400
Power supply and control unit for video 2-wire

The NVV1000-0400 is a video 2-wire BUS power supply and control unit for the centralised supply and control of polarity-free TCS video 2-wire BUS systems on the non-twisted strand. The loop resistance
may be max. 15 Ω. The NVV1000-0400 is suitable for mounting on a DIN-rail.

• light switch and door release relay, programming push button
• LED-display
• Door release relay with integrated voltage supply
• Potential-free switching output for light switching
• Door release time: manually adjustable
• Light switch time: manually adjustable

FVW3030-0600
Front-door station adapter for video 2-wire

The FVW3030-0600 is an adapter for coupling video front-door stations in 6-wire BUS technology to the video 2-wire:BUS power supply unit NVV1000-0400.

• Video 2-wire:BUS supply from the NVV1000
• Can be used for TCS front-door stations of the AVD/AVE, AVU, AMI (except AMI10105-0710/-0757) and KTU series
• Can be used for TCS audio front-door stations in combination with selected video cameras from TCS
• Frequency modulation of the video signal on the video 2-wire:BSU
• Polarity-free av and bv
• Compatible with the TCS:BUS protocol
• Rested according to DIN EN 50486

FVY2200-0600
Video distributor 2-way for video 2-wire

The FVY2200-0600 is a video distributor that picks up a video signal and distributes it across two outputs. The video distributor is preferably installed in riders in order to connect stub lines on the floor. The device is only suitable for operation in the video 2-wire:BUS systems of TCS. The device is suitable for
flush-mount installation in a flush-mount socket, or on a DIN-rail using the supplied DIN-rail clip.

• Application: for splitting video strands
• Use: in risers with stub lines / branches
• Number of video distributors per strand (max.): 5
• Number of video inputs: 1
• Number of video outputs: 2
• Type of mounting: Mounting in flush-mount box, on DIN-rail with DINrail clip
• Type of housing: Built-in housing

FVW3040-0000
Filter component on video 2-wire:BUS system

The FVW3040-0600 is required for connecting “older” TCS:BUS components (e.g. audio indoor stations ISH3x30-0140 and ISW3x30-0140).

• Type of mounting: can be integrated
• Input voltage: +32 V DC + 2 V
• Output voltage without load: 27 V DV
• Output voltage with load: approx. 24 V DC
• Output current: I = 70 mA (on device in standby connected to output)
• Maximum output current: I(max) = 120 mA (on active device connected to output)
• Dimensions H x W x D in mm: 28 X 26.5 x 6 (incl. double-sided adhesive tape)
• Acceptable ambient temperature: -5 to 40°C
• Protection category: IP00, protect against moisture

0038794
Video 2-wire matching resistor

The matching resistor 0038794 is required to operate TCS:BUS indoor stations TASTA Audio (ISW5010-0145) at the end of a video 2-wire BUS strand.

• Type of mounting: integrable, secured with adhesive pads
• Input voltage: +32 V DC + 2 V
• Dimensions H x W x D in mm: 105 x 16 x 5
• Acceptable ambient temperature: -5 to 40°C
• Protection category: IP20, protect against moisture